2003-2007 14mm bolt Dodge Track Bar Bushing Replacement
Includes: 1 pair of bushings (2 halves) & 1 sleeve
Made to fit inside 1.625" ID Bracket and has 14mm Bolt Sleeves. These do not need a housing to be replaced, they are popped out of the track bar and replaced with just the bushing and sleeve.
EMF Dodge Trackbar Bushing Replacement - Made in Canada out of a high quality, high-durometer material to ensure a long lasting product. Inner Sleeve is made from 4140 HTSR Chromoly Steel and then Gas Nitrided.
Bushings replace existing ones in Dodge Track Bars that take ones this size. Bushings were sized after Moog K80777
Large Flange Diameter - 1.84 inches x 0.255" wide
Outer Diameter - 1.525 inches x 0.53" wide
Length of Inner Sleeve - 1.617 inches x 0.873" Diameter
Fastener Bolt Size - 14mm (03-07 Dodge)
BUSHING MATERIAL SPECS
MADE IN CANADA
DUROMETER (HARDNESS) - 95 +/- 5
SPECIFIC GRAVITY - 1.13 G/CC
TENSILE STRENGTH - 6500 PSI
100% MODULUS - 1800 PSI
FLEXURAL MODULUS - 4300 PSI
ULTIMATE ELONGATION - 380%
COMPRESSION SET - 22HR @ +70 DEGREES - 36%
TEMPERATURE RANGE - -40 TO +92 DEGREES CELSIUS (-40 TO +200 DEGREES FARENHEIT)
BELL BRITTLE POINT - -63 DEGREES CELSIUS (-80 DEGREES FARENHEIT)
BAYSHORE REBOUND - 40%
ABRASION RESISTANCE - 70 MM3
TEAR RESISTANCE, INITIAL - 700 PLI
TEAR RESISTANCE, PROPOGATION - 130 PLI